Delphi XM2GO SA10113 Guide de l'utilisateur télécharger pdf (Page 13)

Connecting to a stereo

Plug the AC adaptor into an outlet. Connect the home

antenna and connect the line out to either your home

stereo or powered (PC type) speakers.

Receiving the XM signal

Turn your MyFi on by pressing the power button. You

should be able to hear channel 1, the XM Preview

Channel. If you do not, and the screen displays “NO

SIGNAL,” try moving your MyFi’s antenna to another

location. Make sure the antenna points south, either

outdoors or through a window. If the “NO SIGNAL”

message persists, refer to “Aiming the home antenna”

(page 28).

Please read the TIP below the illustration for optional

setup and activation procedure information.

5V DC

ANT

LINE OUT

Connect to stereo

Aim antenna

TIP: Establishing a good signal environment in the home

setup is highly desirable, but this is not the only way you

can receive the XM signal. As an option, you can refer to

“Using MyFi In Your Vehicle” (page 29) and continue

this setup and activation process with your MyFi installed

in a vehicle.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Pas de commentaire

Delphi XM2GO SA10113 Guide de l'utilisateur Page 13